Inhaltsverzeichnis
Werbung
① Adapter settings
Through this menu, you can set the basic Ethernet configuration.
• User Interface
YES is used to activate the Ethernet. If you set this option at NO, the Ethernet will not work.
• Use DHCP
YES is used to use DHCP (Dynamic Host Configuration Protocol). If you set this option at
YES , it will automatically detect the correct IP address. NO is used when you want to use a
certain fixed IP address. In this case, you need to enter correct addresses in each field.
47
Bedienungsanleitungen / User Manual
SF208 E2 HD LCD Single
Werbung
Inhaltsverzeichnis
