Technical Specifications; Disposal - AEG BSS 4815 Bedienungsanleitung

Cleaning
CAUTION:
Do not submerge the device in water.
• Before cleaning disconnect from mains power supply.
• Clean the device with a soft damp cloth without deter-
gents.
Troubleshooting
Fault Cause
Unit cannot Unit crashes and
be operated. "hangs".
No audio Speaker is not paired
signal via the to the audio source.
Bluetooth
connection
Volume too low
Speaker Pairing does not
cannot be work
connected
Speaker Audio source is
cannot be switched off
connected
Bluetooth is switched
off at the audio
source.
Bluetooth version is
not supported.
Subwoofer Connection to the
does not put sound bar was not
out any sound. established.
Interferences caused
by e.g. WLAN-
networks, cordless
phones or microwave
ovens.
Subwoofer is not
turned on.
Distance between
the subwoofer and
the sound bar is too
great.

Technical Specifications

Model: .................................................................................BSS 4815
Power supply:. .............................................................230 V~ 50 Hz
Power Consumption:............................................................. 110 W
Protection class: ................................................................................II
Net weight: ............................................Sound bar approx. 1.9 kg
Radio component
Bluetooth
Solution
Bluetooth support: ........................................................V2.0 + EDR
Disconnect from the
Range: ..................................................................approx. 15 metres
mains for around 5
Transmission frequency: ......................................2.402-2.480 GHz
seconds. Then switch
Protocols: ....................................................................A2DP/AVRCP
the unit on again.
The right to make technical and design modifications in
Perform a factory
the course of continuous product development remains
reset. see page 37
reserved.
"Reestablishing fac-
This device has been tested according to all relevant current
tory settings"
CE guidelines, such as electromagnetic compatibility and low
Check whether a
voltage directives, and has been constructed in accordance
connection exists. If
with the latest safety regulations.
necessary, pair the
speaker again to the
audio source.
Increase the volume
on the speaker
Increase the volume
on the audio source.

Disposal

Check whether the
Meaning of the "Wheelie Bin" Symbol
audio source supports
the A2DP protocol.
Take care of our environment, do not dispose of electrical
applicances via the household waste.
Switch on the audio
source
Dispose of obsolete or defective electrical appliances via
Switch on the Blue-
municipal collection points.
tooth function in the
Please help to avoid potential environmental and health
audio source.
impacts through improper waste disposal.
Use a different play-
back unit. You contribute to recycling and other forms of utilization of
old electric and electronic appliances.
First turn on the sound
bar and then the sub-
Your municipality provides you with information about col-
woofer.
lecting points.
If the error occur often-
times enlarge distance
to interfering sources.
Use the power switch
to turn on the sub-
woofer on the rear.
Place the subwoofer
closer to the sound
bar.
...........................................Subwoofer approx. 4.2 kg
Frequency range:. ................................... FM 87.5 ~ 108 MHz
English
39