Maintenance And Cleaning; Technical Data - AEG BSS 4841 Bedienungsanleitung

Description of the Control Buttons
(Bluetooth / SD)
NOTE:
Depending on your playback unit, not all functions might
be supported.
The device is equipped with multi functional buttons. For
different functions press the respective button briefly or press
and hold.
Pause Playback (4)
• Briefly press the button to pause playback. The indicator
lamp (3) is lit.
• Press the button again to continue playback. The indica­
tor lamp (3) flashes.
Select Music (6/ 2)
• Press + to go to the next track.
• Press – to restart the current track or to go to the
previous track.
Answering / Ending calls in Bluetooth Mode
• Press / to answer an incoming call.
• Press the button again to end the call.
NOTE:
Music playback stops during an incoming call. After ending
the call, music playback continues.
Rejecting a call in Bluetooth mode
Press and hold the / button to reject an incoming call.
Dial phone number last dialled
Press the / button 2 x briefly to call the last dialled
number.

Maintenance and Cleaning

CAUTION:
Do not immerse the device in water.
• There are no parts inside the device which can be main­
tained by the user.
• Clean the speaker with a slightly damp cloth without
cleaning agent.
Troubleshooting
Problem Cause
The unit The unit is
cannot be blocked and
operated. "hangs".
BSS4841_IM_new
Problem
Cannot switch
the speaker
on.
No audio
signal during
Bluetooth
connection.
Cannot con­
nect speaker.

Technical Data

Model: .................................................................................BSS 4841
Audio connection: ...................................3,5 mm stereo jack plug
Protection rating: .......................................................................IPX 4
Net weight: .................................................................approx. 0.6 kg
Power supply: ..........................................................................DC 5 V
Battery: ............................................... 3,7 V 4000 mAh lithium­Ions
Bluetooth
Bluetooth support: ........................................................V3.0 + EDR
Maximum radio­frequency power transmitted: ..............2.5 mW
Range: .................................................................. approx. 15 meters
Transmitting frequency:..................................... 2,402 − 2,480 GHz
Protocols: ...................................................................A2DP / AVRCP
Solution
The right to make technical and design modifications in
Press the button (12)
the course of continuous product development remains
with a wire or similar to
reserved.
reset the electronics.
Cause
Battery empty.
Speaker is
switched off.
Speaker is not
paired to the
audio source.
Volume too low. Press and hold
Pairing does not
work.
Audio source is
turned off.
Bluetooth
is turned off
on the audio
source.
Bluetooth
version is not
supported.
Charging time: ...................................................approx. 5 hours
Operating time: .............................................. approx. 20 hours
English
33
Solution
Charge the battery
( Page 31)
Switch the speaker on.
Check whether the
connection exists. If
necessary, pair the
speaker to the audio
source again.
the + button on the
speaker to increase the
volume.
Increase the volume on
the audio source.
Check, whether the
audio source supports
the A2DP protocol.
Turn the audio source
on.
Turn the Bluetooth
function on in the
audio source.
Use another playback
unit.
10.04.17