Technical Data - AEG LB 4711 Bedienungsanleitung

English
14
1. Split the cable wires on both
sides by approx. 30 mm and
remove approx. 10 mm of the
insulation on each. Twist the
stripped wires to prevent the
cable from protruding.
2. Release the screw terminals on the back and clamp the
wires underneath. Then tighten the screw terminals again.
NOTE:
• You can also make the connexion at the nuts with
"banana plugs".
• The loudspeaker grilles are removable.
Cleaning
CAUTION:
Do not dip the appliance in water.
• Clean the appliance with a slightly humid cloth without
any additives.
• Remove the loudspeaker grilles and clean them, e.g. with
a vacuum cleaner or lint brush. Then reinsert the grille
into the four holders.

Technical Data

Model: ....................................................................................LB 4711
Pulse load: ................................................................................ 500 W
Maximum power handling capacity: .................................. 350 W
Sinus capacity: ......................................................................... 180 W
Impedance: ...................................................................................8 Ω
Frequency response: ..................................................28-22.000 Hz
Net weight: ...............................................................approx. 15.2 kg
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
Disposal
Meaning of the "Dustbin" Symbol
Protect our environment: do not dispose of
electrical equipment in the domestic waste.
Please return any electrical equipment that
you will no longer use to the collection points
provided for their disposal.
This helps avoid the potential effects of incorrect disposal on
the environment and human health.
This will contribute to the recycling and other forms of reutili-
sation of electrical and electronic equipment.
Information concerning where the equipment can be dis-
posed of can be obtained from your local authority.