Pelgrim OVM526RVS Anleitung Seite 44

USE
Child lock button
+ Timer button
EN 18
• Press and hold the 'lamp button' for 5 seconds.
Bars appear on the display that are (partly) fully lit.
• Turn the 'selection dial' to adjust the dimming level of the display
(one, two or three bars).
The setting will be saved automatically after three seconds.
Standby
If you do not wish to use the display lighting, this can be disabled.
• Press the 'child lock button + timer button' to disable the display.
'Off' and the 'timer' pictogram will appear on the display.
• Press the 'child lock button + timer button' again to reactivate the
display.
'On' and the 'timer' pictogram will appear on the display.
Following a power failure the additional function settings will only
be saved for a few minutes. All settings, except the sound signal
and child lock, will then revert to factory settings.