Maxi-Cosi Pebble Gebrauchsanweisung Seite 10

EN
Cover (fabric)
A
Support pillow for newborn child
B
Push button for releasing Pebble from pushchair
C
Ergonomic handle
D
Belt hook for shoulder part of belt
E
Height adjustment shoulder belts
F
Instruction manual
G
Storage compartment
H
Small hook for clamping sun canopy
I
Sun canopy (built-in)
J
Carrying handle
K
Adjustable pillow
L
Storage flap sun canopy
M
Push button for adjusting carrying handle
N
Shoulder belts with removable belt pads
O
Belt hook for lap part of belt
P
Belt buckle
Q
Crotch strap with belt pad
R
Mounting bars for FamilyFix and EasyBase 2
S
Belt tensioner strap
T
Safety
General Pebble instructions
1. You are personally responsible for the safety of your
baby at all times.
2. Never hold your baby on your lap when driving.
3. The Pebble is developed for an intensive use of
approximately 10 years.
4. We advise to check the expanded polystyrene (EPS)
parts regularly for damages.
18
5. Do not use second-hand products whose history is
unknown. Some parts could be broken, torn or missing.
6. Replace the Pebble when it has been subject of violent
stresses in an accident: the safety of your child can no
longer be guaranteed.
7. Read this instruction manual carefully and keep
it in the storage compartment in the Pebble.
WARNING :
Do not make any changes to the Pebble
whatsoever, as this could affect the performance of the
car seat and render it unsafe.
WARNING :
Children have STRANGLED in loose or
partially buckled harness straps. Fully restrain the child
even when carrier is used outside the vehicle.
Pebble maintenance instructions
1. The cover, cushions and belt pads of the Pebble
can be removed in order for these to be cleaned.
They can be machine-washed. The flexible plastic
edge can be cleaned with water, soap and a
soft cloth.
2. If the cover needs to be replaced at any time,
only use official Maxi-Cosi fabrics.
3. The Pebble must undergo regular maintenance.
Do not use lubricants or aggressive cleaning agents.
The Pebble and your baby
1. Never leave your baby unattended.
2. Always secure your baby with the harness belt.
3. Before every use, make sure the harness is not
damaged or twisted.
4. Make sure you can fit no more than one finger between
the harness and your baby (1 cm).
5. Only use the headrest of the Pebble when the shoulder
belts are in the lowest position.
WARNING :
Never place the Pebble on an elevated
surface (such as a table or chair).
Pebble car use
1. Always check to make sure the car seat can be installed
properly in your car before purchasing it.
2. Make sure the fold-down rear seat is locked into
position.
3. Prevent the Pebble from becoming trapped or weighed
down by luggage, seats and/or slamming doors.
4. Make sure that all luggage and other loose objects are
secure.
5. The safest place for your baby is the rear of your
vehicle, however if you need to install the seat in the
front passenger seat, please ensure that any airbag is
deactivated.
6. Only use a forward-facing seat that is fitted with a
3-point safety belt that complies with the ECE R16
standard (at a minimum).
7. Make sure the car safety belt buckle runs in a straight
line and stays below the belt hook of the Pebble.
See the p.8 example.
EN
8. The car safety belt must be threaded along
all blue markings. For proper installation
instructions, see pages 8-9 and/or the sticker
on the side of the Pebble.
9. Always cover the Pebble when exposed to direct
sunlight in the car. Otherwise, the cover, metal and
plastic parts could become too hot for your child's skin.
WARNING :
The Pebble may only be installed in a
rear-facing position in the car.
Pebble in aeroplanes
• Installing the Pebble with a 2-point safety belt is only
allowed when used in an aircraft.
• In an aircraft, the Pebble may only be used on
forward-facing passenger seats
19