Miditech i2 Control-37 black edition Bedienungsanleitung Seite 9

3. Assign controller number on ten key groups (1-127) then press enter
4. Assign act channel number on ten key groups (1-16) then press enter
5. Finally, press MIDI SELECT knob key again to finish assign knob.
Now you have assigned to one Control knob the MIDI Parameter and the MIDI
Channel. Repeat the same method for the other 16 real-time Controller Knobs and
Faders.
Selecting and setting a presetbank
There are 15 presetbanks with predefined controller settings, each with 17
controllers (Midichannel, Midicontroller Nr.)
All settings are stored in an EE-Prom to be sure at power off or battery change state.
At the end of this usermanual you can find a list with the factory settings of the
controllers.
For selecting a presetbank press MIDI SELECT, then the OCTAVE UP or DOWN
to increase or decrease the banknumber you want to choose, then press ENTER.
Now you can use the new bank, with 17 new controller settings.
For setting a presetbank, please see part Assignment of the 17 Real-time
Controllers!
9