Miditech i2 Control-37 black edition Bedienungsanleitung Seite 5

MIDI "transmit" channel on your i² Control-37 black edition matches the MIDI
"receive" channel of the other instrument.
You also can transmit Mididata from your computer to the USB MIDI-Out jack. Be
sure that you setup the MIDI-In and MIDI-Out port in your Musicsoftware; otherwise
no MIDI communication is possible. Please refer to the usermanual of your
musicsoftware how to do this.
Default Setting of the i² Control-37 black edition
The i² Control-37 black edition will always select the following values for their
parameters when the power is turned on.
*Transmit MIDI Channel no. 1.
*Default Octave will be from C2 (36) to C5 (72)
*Default Aftertouch value will be 0
*Default Velocity value will be 0
*Default Reverb Depth value will be 64
*Default Pan Pot value will be 64
*Default Volume value will be 127
*Default CC Data value will be 0
*Default CC no. value will be 0
*Default Control Change (CC-00=0, CC-32=0) message will be transmitted.
*Default Program Change (PG=1) message will be transmitted.
*Preset Memory value will be 1
*Real-time Controller 1 - 17 with preset 1 (see appendix)
5