Troubleshooting - Miditech i2 Control-37 black edition Bedienungsanleitung

TROUBLE SHOOTING
If anything doesn't work . . .
Please check following points:
MIDI connection fault . . .
Do you have installed your midi drivers from your soundcard or USB interface?
Look at START --> Settings --> Systemcontrol --> Multimedia --> Tab Midi
for installed midi drivers. If not, you have to do this first. After that your Keyboard
should work with your computer. Attention: In some programs you have to set the
Input-Port, before you can receive MIDI-data. Please check!!
Audio is delayed . . .
This problem is often attached to the midi device, but in reality it is a problem of the
sound card in your computer. The easiest way to solve this latency problem is to
install an audio-interface with a special ASIO driver, and a compatible music
software.
MIDI Device is not recognized . . .
There are some misunderstandings about midi, because the computer does not
recognize a midi device, except it is an USB-device. The midi standard doesn't
support recognizing of devices. The i² Control-37 black edition is recognized by
USB but not by a MIDI-interface, this is normal!!
Pedal doesn't work . . .
May be you have the wrong pedal type. There are two types of pedals in the market:
One is a pedal with an open contact, and if pressed it closed, and one is with a
closed contact and opened if pressed. The keyboard needs a pedal with an open
contact!
USB doesn't work . . .
Is powerswitch on power-on position?
11