Advice On Disposal - Siemens SL25 Series Gebrauchsanleitung

en
Problem Possible causes
Loss of pressure Steam release button activated during a
during ironing. long period of time.
Water leakage from Drainage plug located at the bottom of the
the boiler appliance is loose.
If the above does not solve the problem, get in touch with authorized technical service.

Advice on disposal

Our goods come in optimised packaging. This basically
consists in using non-contaminating materials which should
be handed over to the local waste disposal service as
secondary raw materials. Your local town council can give you
information about how to dispose of obsolete appliances.
This appliance is labelled in accordance with
European Directive 2002/96/EG concerning
used electrical and electronic appliances
(waste electrical and electronic equipment -
WEEE).
The guideline determines the framework for
the return and recycling of used appliances
as applicable throughout the EU.
You can download this manual from the local homepages of Siemens.
14
Solution
Use the steam release button (11) with intervals. This
improves the ironing result as the textiles will be dried
and stay smooth better.
Tighten up boiler drainage plug with a coin