Advice On Disposal - Siemens SL25 Gebrauchsanleitung

en
Problem
The ironed
• The selected temperature is too high and
garment turns dark
has damaged the garment.
and/or sticks to the
soleplate.
The soleplate turns
• This is a regular consequence of usage.
brown.
The iron does not stop
• "Intelligent steam" function activated.
steaming after placing
it on the pad.
The appliance makes
• Water is being pumped into the steam tank.
a pumping sound.
• The sound will not stop.
Loss of pressure Steam release button activated during a long
during ironing. period of time.
Water leakage from Drainage plug located at the bottom of the
the boiler appliance is loose.
If the above does not solve the problem, get in touch with authorized technical service.

Advice on disposal

Our goods come in optimised packaging. This basically
consists in using non-contaminating materials which
should be handed over to the local waste disposal service
as secondary raw materials. Your local town council can
give you information about how to dispose of obsolete
appliances.
You can download this manual from the local homepages of Siemens.
14
Possible causes
as applicable throughout the EU.
Solution
• Select a suitable temperature for the
material being and clean the sole plate with
a damp cloth.
• Clean the soleplate regularly with a damp
cloth.
• Just press the trigger once again and the
iron will stop steaming at once.
• This is normal.
• If the sound will not stop, do not use the
steam generator and contact an authorised
technical service centre.
Use the steam release button (11) with
intervals. This improves the ironing result
as the textiles will be dried and stay smooth
better.
Tighten up boiler drainage plug with a coin
This appliance is labelled in accordance
with European Directive
concerning used electrical and electronic
appliances (waste electrical and electronic
equipment - WEEE).
The guideline determines the framework for
the return and recycling of used appliances
2002/96/EG