Omnitronic MP Series Bedienungsanleitung Seite 23

11
Control PRIORITY LEVEL
Adjusts the attenuation level when releasing the
chime and in case of microphone announcements
via microphone channel 3.
12
Inputs MIC 1 and MIC 2
6.3 mm jacks for connecting dynamic microphones.
13
Inputs LINE 1 to 3
Stereo RCA inputs for connecting units with line
level (e.g. CD player).
14
Output LINE
Stereo RCA output for connection to units with
line level inputs (e.g. mixer, amplifier).
15
Screw connectors for 70 V and 100 V speakers
Screw connector for 4 to 16  speakers
16
17
Common ground connection COM for all
speakers
18
Mains cable
For connection to a mains outlet.
19
Clamping screw
For a potential ground connection.
20
Mains fuse 1 and 2
Only replace fuses when the unit is disconnected
from the mains. Only use fuses of the same rating
and power. The correct fuse value is specified on the
rear panel.
23/28 00053678.DOC, Version 1.3