Bosch Nyon Originalbetriebsanleitung Seite 21

Operating mode "Dashboard"
This operating mode displays various pieces of statistical da-
ta, the connection status and the synchronisation status.
d1
d2
d3
d4
d5
d1 Clock
d2 Charge level indicator of the eBike battery pack
d3 Connection status
d4 Nyon version information
d5 Nyon synchronisation information
d6 Speed/light status display
(when the on-board computer is fitted)
d6 Charge level indicator of the on-board computer battery
(when the on-board computer is removed)
d7 Highest number of kilometres travelled in a month
d8 Kilometres travelled in comparison to the previous
month
d9 Total kilometres
d10 Daily kilometres travelled in the last 30 days
The following are synchronised:
– Saved routes and locations
– User-defined screens and riding modes
– User settings
Synchronisation is performed via WLAN or Bluetooth®. If both
connection types are deactivated, you will receive a corre-
sponding fault message.
Operating mode "Ride"
This operating mode provides current journey data.
r1
r2
r3
r4
r5
r1 Clock
r2 Own pedal power
r3 Speed
r4 Engine power
Bosch eBike Systems
d6
d7
d8
d9
d10
r6
9
r7
r8
r9
r10
r5 Assistance-level indicator
r6 Shift recommendation/eShift displays
r7 Trip meter
r8 Average speed
r9 Coverage
r10 Charge level indicator of the eBike battery pack
Operating mode "Map&Navigation"
Use this operating mode to download map data based on
Open Street Map (OSM) over the web. You can navigate using
these maps.
The map material suitable for the place of residence is in-
stalled by the bike dealer for the respective buyer. If required,
additional maps can be downloaded via your smartphone ap-
plication "Bosch eBike Connect" and be transferred to your
on-board computer. Detailed instructions can be found in the
online manual under
"www.Bosch-eBike.com/nyon-manual".
If you have an active WLAN connection, it is possible to load
any maps directly onto Nyon via "Settings">"Map & Naviga-
tion"> "Map Manager".
When you switch on Nyon, it begins the satellite search to re-
ceive GPS signals. Once a sufficient number of satellite sig-
nals is found, the operating mode displays
"Map&Navigation" on the map with the current location. In
case of unfavourable weather conditions or locations, the sat-
ellite search may take a little longer. If the application fails to
find satellites over a long period of time, restart Nyon.
Pressing the joystick 1 to the right allows you to change the
zoom configuration of the map section by selecting the sub
menu on the right side. You can display the range of your
eBike battery pack or choose one from different navigation
options. The zoom configurations for the map section can also
be changed by pressing the joystick.
The basic remaining range of the battery can be extended by
means of the "Topo operating range" premium feature. The
"Topo operating range" feature then calculates and displays
the battery's remaining range, taking into consideration the
topographical conditions. The calculation of the topographic
range extends to 100 km maximum. Detailed instructions can
be found in the online manual under
"www.Bosch-eBike.com/nyon-manual".
Your nearest "Bosch eBike experts" are also shown under
"Points of Interest". When you select a dealer, the route to it
will be calculated and made available for you to select.
English–5
1 270 020 XBN | (14.6.17)