Switching Off; Temperature Indicator; Temperature Regulation; Turbo Coolmatic Function - AEG Electrolux SANTO Z 9 18 42-4 i Benutzerinformation

26
Control panel

Switching off

1. Keep ON/OFF switch pressed for more than 5 seconds.
2. After that, a countdown of the temperature from -3 -2 -1 will be shown. When "1"
appears the appliance is turned off. The temperature indicator switches off. The Pilot
light switches off.

Temperature indicator

The temperature indicator shows the fridge temperature currently set .

Temperature regulation

The temperature can be adjusted between +3°C and +8°C.
By pressing the Temperature regulators, the current temperature setting flashes on the
Temperature indicator. It is possible to modify the setting temperature only with flashed
indicator.
• To set a warmer temperature, press Temperature regulator +.
• To set a colder temperature, press Temperature regulator -.
The Temperature indicator displays the set temperature.
The set temperature will be reached within 24 hours.
For a correct storage of the food the following temperature should be set:
• +5 °C in the fridge.
After a long period out of use it is not necessary to set again the temperature because it
remains stored.
A medium setting is generally the most suitable.
The exact setting should be chosen keeping in mind that the temperature inside the appli-
ance depends on:
• room temperature
• how often the door is opened
• the quantity of food stored
• the location of the appliance.
If the ambient temperature is high or the appliance is fully loaded, and the appliance is set
to the lowest temperatures, it may run continuously causing frost to form on the rear wall.
In this case the Temperature regulator must be set to a higher temperature to allow auto-
matic defrosting and therefore reduced energy consumption.

TURBO COOLMATIC function

The TURBO COOLMATIC function is suited for quick cooling of large quantities of goods in
the refrigerator.
To activate the function, do these steps:
1. Press the TURBO COOLMATIC button.
2. The TURBO COOLMATIC indicator switches on.
The TURBO COOLMATIC function now provides for intensive cooling. A temperature of +3°C
is automatically selected.
The TURBO COOLMATIC function is deactivated automatically after a period of 6 hours.
You can deactivate the function at any time: