Steps Of Ending Flight; Additional Instruction - XciteRC HotBee 120 3D Bedienungsanleitung

Mode 1 (throttle stick at right hand)
EN
1. When moving the aileron stick left or right, the
helicopter accordingly rolls left or right.
Steps of ending fl ight
• Disconnect the power cable of the receiver.
• Turn off the transmitter.
• Remove the battery.

Additional Instruction

• The front propellers are in orange color while the rear propellers are in black
• After connecting the power of the Hotbee 3D, left rear / right front blades rotate clockwise, left front / right
rear blades rotate counterclockwise.
• You can adjust the radio trim button (except the throttle trim) if the quadcopter fl ight drift.
22
Anticlockwise
Left
Clockwise
2. When moving the elevator stick up or down,
the helicopter accordingly rolls forward or back-
ward.
Front Clockwise
Right
Back Anticlockwise
15000000 XciteRC Hotbee 3D Quadrocopter
Flight control