Using The Appliance; Switching The Appliance On And Off - Silver Crest SEAD 1800 A1 Bedienungsanleitung

Using the appliance

Switching the appliance on and off
1) Using the control dial "Temperature"
can set the temperature in 1°C steps. A signal tone sounds for every 5°C.
The set temperature appears in the display indicator "Set Temperature"
2) Using the control dial "Minutes"
You can set the time in 1 minute steps. A signal tone sounds for every
5 minutes. The set time appears in the display indicator "Minutes"
NOTICE
► The background lighting of the display goes out after about 5 minutes
after the last activation of one of the dials if you do not start the heating
process. The settings on the display remain visible. Turning one of the
dials will reactivate the background lighting in the display.
3) Press the START/STOP
progress in indicated through the continous beam "
heating temperature is shown in the display indicator " Current Temperature"
Once the heating up is complete, signal tones sound, "
display and the time set in the display indicator "Minutes"
count down.
NOTICE
► The background lighting in the display remains switched on while the
appliance is working.
As soon as the set time period has expired, signal tones sound. The appliance
switches itself off. „
NOTICE
► To stop a heating process or a boiling process, press the heating START/
STOP
4) When the appliance is not in use, ALWAYS remove the plug from the mains
power socket.
■ 10 │ GB │ IE │ NI
heating button. The heating begins. The heating
" and „
button.
, set the desired temperature. You
set the desired cooking time in minutes.
" extinguish in the display.
.
.
". The momentary
.
" appears in the
begins to
SEAD 1800 A1