Technical Specifications - EuroLite UV-TUBE SLIM COMPLETE SET Bedienungsanleitung

3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The interior of the device should be cleaned at least annually using a vacuum-cleaner or an air-jet.
There are no serviceable parts inside the device except for the lamp. Maintenance and service operations
are only to be carried out by authorized dealers.
Please refer to the instructions under "Installing/Replacing the lamp".
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Dimensions (LxWxH):
Weight:
Fitting lamp (slim line):
Maximum ambient temp. t
Maximum housing temp. t
(steady state):
Please note: Every information is subject to change without prior notice. 25.02.2004 ©
Disconnect from mains before starting maintenance operation!
15 W/45 cm
220-250 V AC, 50 Hz ~
18 W
480 x 35 x 60 mm
0,3 kg
UV-tube 15W / 45cm
: 45° C
a
80° C
B
DANGER TO LIFE!
18 W/60 cm
220-250 V AC, 50 Hz ~
20 W
635 x 35 x 60 mm
0,4 kg
UV-tube 18W / 60cm
45° C
80° C
16/29
36 W/120 cm
220-250 V AC, 50 Hz ~
40 W
1245 x 35 x 60 mm
0,6 kg
UV-tube 36W / 120 cm
45° C
80° C
51101450_V_1_0.DOC