Controls; Residual Heat Indicator; Before Using For The First Time; Cleaning The Appliance - Siemens ET475FUB1E Gebrauchsanleitung

Controls

Switches on the appliance
#
Activates the wipe protection/childproof lock
„
Selects the front heating element
'
0||| Sets the grill setting/kitchen timer
Selects both heating elements at the same time
ø
Selects the rear heating element
'
Switches on the kitchen timer/stopwatch
0
Controls
Touching a symbol activates the associated function.
Notes
The settings will remain unchanged if you touch
■
multiple symbols at once. This allows you to wipe up
spills on the control panel.
Always keep the controls dry. Moisture reduces their
■
effectiveness.

Residual heat indicator

The appliance has a two-stage residual heat indicator.
If appears on the display, the appliance is still hot. As
•
the appliance cools down further, the indicator changes
to . The indicator goes out when the appliance has
œ
cooled sufficiently.

Before using for the first time

KBefore using for the first
time
In this section, you can find out what you must do
t h e f i r s t t i m e B e f o r e u s i n g f o r
before using your appliance to prepare food for the first
time. Read the safety information before you
start.~ "Important safety information" on page 18

Cleaning the appliance

Before using the appliance and accessory parts for the
first time, clean them thoroughly with lukewarm soapy
water.

Heating the grill

Heat the empty grill for a few minutes at the highest
setting. This will eliminate the new odour. A slight
development of smoke is normal when the grill is used
for the first time.
en
21