Operating Elements - Omnitronic SLM-500 Bedienungsanleitung

OPERATING ELEMENTS

1
Measuring microphone with electret condenser microphone capsule.
If you operate at wind speed over 10 m/sec, please use the
protective windscreen included in the delivery.
2
Display
3
Button
4 Level buttons ▲▼ for selecting the measuring range 30-80 dB, 40-
90 dB, 50-100 dB, 60-110 dB, 70-120 dB, 80-130 dB or 30-130 dB.
Basic setting after switching on: 40-90 dB. The display indicates the
lower value on the left side and the higher value on the right side.
5
Button MAX to activate/deactivate the measurement of the
maximum level; with the function activated, MAX is indicated on the
display.
6
Button A/C selects the weighting filter. A = the measurement
corresponds to the auditory sensation of the human ear; C = the
measurement corresponds to the physical sound level.
7 Button FAST/SLOW for selecting the dynamic measuring mode.
After switching on, the display indicates the basic setting FAST for
sound levels changing fast. Press the FAST/SLOW button to switch
to SLOW for sound levels changing slowly.
for switching on and off.
12