Operating Elements - Omnitronic SLM-250 Bedienungsanleitung

OPERATING ELEMENTS

3
1
Measuring microphone with electret condenser microphone capsule.
If you operate at wind speed over 10 m/sec, please use the
protective windscreen included in the delivery.
2
Display
MAX/MIN: Maximum/maximum level
OVER: Reading over maximum range
dBA: Measuring unit
HOLD: present value measured
BAT: Battery exhausted
3
Button HOLD for holding the present value measured.
4
Button MAX/MIN to switch between the measurement of the
maximum and minimum level; with the function activated, MAX or
MIN is indicated on the display.
5
Button
6
6.3 mm thread for mounting the SLM-250 on a stand.
7 Battery compartment
for switching on and off.
1
2
4
5
10
6
7