Cleaning The Oven Door; Removing The Door - AEG 47056VS Benutzerinformation

OVEN LAMP
WARNING!
Be careful when you change the
oven lamp. There is a risk of elec-
trical shock.
Before you change the oven lamp:
• Deactivate the oven.
• Remove the fuses in the fuse box or de-
activate the circuit breaker.
Put a cloth on the bottom of the
oven to prevent damage to the
oven light and glass cover.
Replacing the oven lamp
1. You can find the lamp glass cover at
the back of the cavity.
Turn the lamp glass cover counter-
clockwise to remove it.
2. Clean the glass cover.
3.
Replace the oven lamp with an appli-
cable 300°C heat-resistant oven lamp.

Removing the door:

1
When the cleaning procedure is comple-
ted, insert the oven door in the opposite
sequence. Make sure that you hear a click
when you insert the door. Use force if nec-
essary.
2
Use the same oven lamp type.
4. Install the glass cover.

CLEANING THE OVEN DOOR

To make the cleaning easier, remove the
door.
WARNING!
Make sure that the glass panels
are cool before you clean the
glass door. There is a risk that the
glass could break.
WARNING!
When the door glass panels are
damaged or have scratches, the
glass becomes weak and can
break. To prevent this, you must
replace them. For more instruc-
tions, contact your local Service
Centre.
1. Open the door fully.
2. Move the slider until you hear a click.
3.
Close the door until the slider locks.
4. Remove the door.
To remove the door, pull the door
outwards first from one side, and
then the other.
OVEN GLASS PANELS
The door glass on your product
can be different in type and shape
from the examples you see in the
diagrams. The number of glasses
can also be different.
ENGLISH
29