Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch UniversalCirc 12 Originalbetriebsanleitung

OBJ_BUCH-2942-001.book Page 16 Tuesday, August 16, 2016 11:43 AM
16 | English
 Do not operate the power tool stationary. It is not de-
signed for operation with a saw table.
 Do not use high speed steel (HSS) saw blades. Such saw
blades can easily break.
 Do not saw ferrous metals. Red hot chips can ignite the
dust extraction.
 When working with the machine, always hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more secure with both hands.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
 Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
 In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
 Use the battery only in conjunction with your Bosch
power tool. This measure alone protects the battery
against dangerous overload.
 The battery can be damaged by pointed objects such as
nails or screwdrivers or by force applied externally. An
internal short circuit can occur and the battery can burn,
smoke, explode or overheat.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Intended Use

The machine is intended for lengthways and crossways cut-
ting of wood with straight cutting lines as well as mitre cuts in
wood while resting firmly on the workpiece.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Battery unlocking button
2 Battery pack
3 Lock-off button for On/Off switch
4 On/Off switch
5 Hex key
1 609 92A 32F | (16.8.16)
6 Spindle lock button
7 Base plate
8 Fastening bolt for parallel guide
9 Scale for mitre angle
10 Wing bolt for bevel-angle preselection
11 Cutting mark, 45°
12 Cutting mark, 0°
13 Blade guard
14 Auxiliary handle (insulated gripping surface)
15 Handle (insulated gripping surface)
16 Battery charge-control indicator
17 Temperature control/overload protection indicator
18 Wing bolt for cutting depth preselection
19 Cutting-depth scale
20 Retracting blade guard
21 Saw spindle
22 Lever for retracting blade guard
23 Mounting flange
24 Saw blade
25 Clamping flange
26 Clamping bolt
27 "PowerLight"
28 Reference mark for mitre angle setting
29 Fastening screw for extraction adapter
30 Extraction adapter
31 Vacuum hose*
32 Reference mark for cutting depth setting
33 Parallel guide
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Technical Data

Circular Saw
Article number
Rated voltage
No-load speed
Cutting depth, max.
– for 0° bevel angle
– for 45° bevel angle
Spindle lock
Base plate dimensions
Saw blade diameter
Blade body thickness
Tooth thickness/setting, max.
Tooth thickness/setting, min.
Mounting bore
Weight according to EPTA-
Procedure 01:2014
* limited performance at temperatures <0 °C
UniversalCirc 12
3 603 CC7 0..
V= 10.8–12
-1
min 1400
mm 26
mm 17

mm 147 x 88
mm 85
mm 0.7
mm 1.1
mm 1.0
mm 15
kg 1.4
Bosch Power Tools