Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation via DMX controller
For operation with a controller with DMX512 protocol, the light set is
equipped with 15 control channels.
Setting the DMX starting address and selecting the DMX operating
mode
1. To be able to operate the light set with a DMX controller, the DMX
starting address must be set for the first DMX channel. For this press
the button MENU so many times until
display. Then use the buttons UP and DOWN to set the address.
Note: The starting address depends upon which DMX controller is
being used. Please refer to its user manual.
2. To switch to the DMX operating mode, press the button MENU so
many times until the display indicates
the button UP. The display will indicate
the light set can be operated with the DMX controller.
DMX protocol
Channel 1, Preset programs, automatic mode, sound control
DMX value
000 – 009
Off
010 – 029
Program 1
030 – 049
Program 2
050 – 069
Program 3
070 – 089
Program 4
090 – 109
Program 5
110 – 129
Program 6
130 – 149
Program 7
150 – 169
Program 8
170 – 189
Program 9
190 – 209
Program 10
210 – 229
Program 11
230 – 249
Automatic mode
250 – 255
Sound control
Channel 2, Master control
DMX value
000 – 255
Dimming from 0 – 100%
Channel 3, Strobe control
DMX value
000 – 009
Off
Strobe slow ® fast
010
–
255
Channel 4, Spot 1: Brightness red or running speed
DMX value
000 – 255
Dimming from 0 – 100%
If channel 1 is set to a DMX value between 010
program or automatic mode is selected, channel 4 controls the running
speed:
DMX value
000 – 255
R
Channel 5, Spot 1: Brightness green or fade time
DMX value
000 – 255
Dimming from 0 – 100%
If channel 1 is set to a DMX value between 010
program or automatic mode is selected, channel 5 controls the fade
time:
DMX value
000
No function
001 – 255
Fade time slow
Channel 6, Spot 1: Brightness blue
DMX value
000 – 255
Dimming from 0 – 100%
is indicated in the
or
and after a few seconds
Function
Function
Function
Function
–
249, i.e. a preset
Function
®
unning speed
slow
fast
Function
–
249, i.e. a preset
Function
®
fast
Function
Channel 7, Spot 2: Brightness red
DMX value
000 – 255
Channel 8, Spot 2: Brightness green
DMX value
000 – 255
Channel 9, Spot 2: Brightness blue
DMX value
000 – 255
. Then press
Channel 10, Spot 3: Brightness red
DMX value
000 – 255
Channel 11, Spot 3: Brightness green
DMX value
000 – 255
Channel 12, Spot 3: Brightness blue
DMX value
000 – 255
Channel 13, Spot 4: Brightness red
DMX value
000 – 255
Channel 14, Spot 4: Brightness green
DMX value
000 – 255
Channel 15, Spot 4: Brightness blue
DMX value
000 – 255
The control panel DMX LED Operator 4 available as accessory is
optimally adapted to the light set. It has four channels so that all spots of
the light set can be controlled in sync. To control the light set with the
DMX LED Operator 4 adjust the DMX starting address 021.
www.eurolite.de
Dimming from 0 – 100%
Dimming from 0 – 100%
Dimming from 0 – 100%
Dimming from 0 – 100%
Dimming from 0 – 100%
Dimming from 0 – 100%
Dimming from 0 – 100%
Dimming from 0 – 100%
Dimming from 0 – 100%
Operation with the DMX LED Operator 4
© Copyright Reproduction prohibited!
Subject to change 17.11.2010
Function
Function
Function
Function
Function
Function
Function
Function
Function
00056118.DOC, Version 2
Werbung
