Philips Satinelle ICE HP6482 Bedienungsanleitung Seite 14

EnglisH
1
Problem
Skin irritation
occurs.
The cooling
glove is not
cold enough.
It is not
possible to
remove the
epilating head.
Cause
You used the
epilator for the
first time or after
a long period of
disuse.
You did not put
the ice gel pad in
the freezer or
freezing
compartment.
You did not
freeze the ice gel
pad long enough.
You did not press
the release
button.
Solution
Some skin irritation may occur the
first few times you use the
appliance. This is absolutely normal
and usually disappears quickly. For
tips to reduce skin irritation, see
the first section of chapter 'Using
the appliance'. Also make sure you
keep the epilating head clean.
Put the ice gel pad in the freezer
or freezing compartment (***) for
at least 2 hours. Do not store
the ice gel pad in the refrigerator.
Put the ice gel pad without the
cooling glove in the freezer or
freezing compartment (***) for at
least 2 hours.
Press the release button and pull
the epilating head off the appliance
(Fig. 14).