Trouble Shooting - Schaub Lorenz SL 208C DD Bedienungsanleitung

2. Unscrew the illuminate-cover (1) and remove it (→).
3. Turn the illuminate anti-clockwise to remove it.
4. Insert a new illuminate of the same kind and power (10W).
5. Reinstall the illuminate-cover.
6. Connect the appliance to the mains and switch it on.
 According to the EU regulation No. 244/2009 your appliance is classified as a
household appliance in accordance with the ecodesign requirements for non-
directional household lamps. This means that bulbs, which are used in
household appliances, must not be used to illuminate domestic establishments.

6. Trouble shooting

WARNING! Before you start troubleshooting, disconnect the
appliance from the mains. Any work not described in this instruction
manual must be carried out by a qualified professional only.
POSSIBLE CAUSE
 The plug of the appliance is not
connected to the socket.
 The plug has become loose.
 The socket is not supplied with
energy.
 The fuse is switched off.
 The voltage is too low.
 Incorrect energy supply.
The compressor operates for too long.
 The appliance has been switched off
for a while.
 Doors opened too often or too long.
 The door was frequently opened.
 The door is not properly closed.
 Encrusted ice inside the appliance.
 The current temperature setting is
too warm
MALFUNCTION
The appliance does not work at all.
The compressor does not work at all.
Unsatisfactory cooling capacity.
MEASURE
 Check the corresponding socket by
connecting it with another appliance.
 Check the fuse box.
 Compare the data on the model
plate with the data of your energy
supplier.
 Check the energy supply.
 The appliance needs some time to
reach the preset temperature.
 Do not open the door too often/too
long.
 Select a different setting if necessary.
 Check the door/door seals.
 Defrost the appliance.
35