Cleaning Or Replacing Uv Lamps In The Base - ergoline PRESTIGE 1150 INTELLIGENT PERFORMANCE Gebrauchsanweisung

09/2017 1017594-00A
– Only utilize original UV lamps.
– Only touch new lamps in the handling zone.
– Test the function of the safety switch.
The safety switch ensures that the device switches off in the event of a
faulty filter panel.
– Press the switch.
If the switch springs back automatically then it is functional.
– Replace the filter panel.
4.9 Cleaning or replacing UV lamps in the
base
– Lift up the acrylic glass panel and then remove the lamp covers and the
partition: see page 45.
Replacing lamps: see page 52.
Changing the chip card: see page 51.
Cleaning and maintenance
Operating instructions – 55/76