Cleaning And Maintenance - EuroLite LED CBC-9x15W COB RGB Bedienungsanleitung

Channel 28 - Internal programs, Sound control
Value
000 – 010 No function
011 – 040 Program 1
041 – 080 Program 2
081 – 120 Program 3
121 – 160 Program 4
161 – 200 Program 5
201 – 240 Program 6 (endless loop from 1 -5)
241 – 255 Sound control
Channel 29 – Auto program speed
Value
Increasing speed of the program settings
000 - 255
under Channel 28 (011 - 240)
Channel 30: Dimmer
Value:
000 – 255 Dimmer ( 0 – 100 %)
Channel 31: Strobe
Value:
000 – 010 No function
011 – 255 Strobe
(increasing speed)
Channel 32 – Dimmer speed
Value
000 – 051 Control Board setting dimmer speed
052 – 101 Neutral
102 – 152 Dimmer speed 1
153 – 203 Dimmer speed 2
204 – 255 Dimmer speed 3

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
Function
Function
Function:
Function:
Function
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
37/39 00078358.DOC, Version 1.0