EuroLite LED CBC-9x15W COB RGB Bedienungsanleitung Seite 30

Dimmer
Press the MODE button until the LED display shows "diM" and press the ENTER button to confirm. You can
now choose the desired dimmer speed via the UP or DOWN buttons.
OFF: off
dM1: fast
dM2: middle
dM3: slow
Please press the ENTER button to confirm and then the MODE button to attain the main menu.
(default OFF)
Ventilation
Press the MODE button until the LED display shows "FAN" and press the ENTER button to confirm. You can
now choose the desired ventilation fan temperature control via the UP or DOWN buttons.
AUTO: Adjusts automatically to the operating temperature.
HIgH: Operates at peak performance.
Please press the ENTER button to confirm and then the MODE button to attain the main menu.
(default AUTO)
Linking
Here you can determine the Master device and the number of Slave devices with which it should be linked.
Press the MODE button until the LED display shows "Sed" and press the ENTER button to confirm.
You can now choose the desired Master mode via the UP or DOWN buttons.
Sed1: Links the Master device with one Slave
Sed4: Links the Master device with three Slaves
Please press the ENTER button to confirm and then the MODE button to attain the main menu.
(default Sed1)
Master/Slave
Press the MODE button until the LED display shows "SLA" and press the ENTER button to confirm.
You can now choose the desired Slave mode via the UP or DOWN buttons.
SLA 1: Slave 1 device, connected to Master device Sed1 and plays back the same program as the Master
device.
SLA 2: Slave 2 device, connected to Master device Sed4.
SLA 3: Slave 3 device, connected to Master device Sed4.
SLA 4: Slave 4 device, connected to Master device Sed4.
If you would like to connect four devices, one on top of the other, set the Master device to Sed4 and the
Slave devices to SLA2, SLA3 and SLA4.
Master (Sed4)
Slave SLA4
Set the Master device to an Auto (P--) mode or to Sound control (Snd). The Slave devices are now linked
with the Master device, that they play back the Master program – as Chaser (continuous loop) – in series.
Please press the ENTER button to confirm and then the MODE button to attain the main menu.
(default SLA1)
Slave SLA2
Slave SLA3
30/39 00078358.DOC, Version 1.0