Dmx Mode; Dmx-Protocol; Channel Mode - EuroLite LED CBC-9x15W COB RGB Bedienungsanleitung

DMX MODE

The device has five different DMX channel modes. Via the LED display, you can assign the DMX channel
mode and the DMX starting address.
The DMX fixture address is defined as the first channel from which the LED CBC-9x15W COB RGB will
respond to the controller.
Addressing the device: 3-, 5-, 9-, 27-, or 32-Channel Mode
Press the MODE button until the display shows one of the DMX modes 3CH, 5CH, 9CH, 27CH or 32CH,
then press the ENTER button to confirm.
Set the desired address via the UP or DOWN buttons (001 - 512).
Please press the ENTER button to confirm and then the MODE button to attain the main menu.
Controlling:
After having addressed the LED CBC-9x15W COB RGB, you may now start operating it via your lighting
controller.
Please see the following DMX protocol graphics for the respective channel values.

DMX-protocol

3-Channel Mode

Channel 1: Red
Value:
000 – 255 Red ( 0 – 100 %)
Channel 2: Green
Value:
000 – 255 Green ( 0 – 100 %)
Channel 3: Blue
Value:
000 – 255 Blue ( 0 – 100 %)
5-Channel Mode
Channel 1: Red
Value:
000 – 255 Red ( 0 – 100 %)
Channel 2: Green
Value:
000 – 255 Green ( 0 – 100 %)
Channel 3: Blue
Value:
000 – 255 Blue ( 0 – 100 %)
Channel 4: Dimmer
Value:
000 – 255 Dimmer ( 0 – 100 %)
Channel 5: Sound control and Strobe
Value:
000 – 000 No function
001 – 005 Sound control
006 – 010 No function
011 – 255 Strobe
(increasing speed)
Function:
Function:
Function:
Function:
Function:
Function:
Function:
Function:
31/39 00078358.DOC, Version 1.0