Auto Answer - AUDIOLINE Matrix 482 Bedienungsanleitung

Preparing the Telephone
Inserting the batteries
Open the battery compartment
cover.
Put in the batteries.
Close the battery compartment
cover.
a
Attention: Use only type AAA NiMH 450 mAh rechargeable batteries.
Never use normal batteries / primary cell batteries. Observe the correct polarity!
Charging the batteries
☞
Before the handset is used for the first time, insert it in the base station /
charging station for at least 16 hours.
The handset warms up during the charging process. This is normal and does
not represent a risk. Use only the adapter plug unit provided for the charging
station. The battery status is shown on the display. When the battery capacity is
nearly exhausted, the battery symbol (
appear in the display).
You should now put the handset for charging into the base station or the charg-
ing station.
Setting the time and date on the handset
At initial operation the handset does not have the correct time (e.g. for entries in
the call list). The display shows "12:00" underneath the handset's name.
Date and time are set through the menu item "Time / Date and Time". In the
case of mains failure these settings will be lost.
Setting the display language
The display language is available in different languages. The default setting is
"German (Deutsch)". Set the language using the menu item "Mobilteil / Sprache"
("Handset / Language").

Auto Answer

If this function is activated, an incoming call is taken when the handset is
removed from the base station. The automatic answering function is activated
and deactivated using the menu item "Handset / Auto Talk".
Service-Hotline Germany: Tel. 0180 5 001388 (Costs for call from german
landline at time of print: 14 ct/min, max. 42 ct/min from mobile phone providers.)
6
) will flash and "Battery Low" will