AUDIOLINE Matrix 482 Bedienungsanleitung Seite 70

Answering machine
Changing the answer delay setting
> 2 sec
Remote access code settings
The remote access code is a 3-digit code used to operate the machine remotely
(refer to "Remote Operation"). The remote access code is set to '0 0 0' by
default.
Checking the remote access code
> 2 sec
Changing the remote access code
> 2 sec
Service-Hotline Germany: Tel. 0180 5 001388 (Costs for call from german
landline at time of print: 14 ct/min, max. 42 ct/min from mobile phone providers.)
28
Press and hold down the shown key for approx. 2 seconds.
The current setting will be announced.
Change the setting with the keys
Press briefly to store the settings. The new setting will
be announced.
If you do not press any keys for 10 seconds, the machine will
revert back to the answering machine menu, without changing
the settings. If there is a loss of power in the base, the number
of rings will revert to 3 rings again.
Press the shown key for approx. 2 seconds. The current set-
ting will be announced. To leave the setting without change
press .
Press the shown key for approx. 2 seconds. The current set-
ting will be announced.
Change the setting digit by digit with the keys
Press briefly for storing and skipping to the next digit.
The new setting will be announced.
If you do not press any keys for 10 seconds, the machine will
revert back to the answering machine menu, without changing
the settings.
/ .
/ .