Auto Answer - AUDIOLINE Pro 280 Bedienungsanleitung

Preparing the Telephone
Inserting the batteries
Open the battery compartment cover. Put in the
batteries. Close the battery compartment cover.
Attention: Use only type AAA NiMH 400 mAh
rechargeable batteries. Never use normal
batteries / primary cell batteries.
Observe the correct polarity!
Charging the batteries
Before the handset is used for the first time, insert it in the base station /
charging station for at least 16 hours.
The handset warms up during the charging process. This is normal and
does not represent a risk. Use only the adapter plug unit provided for the
charging station. The battery status is shown on the display. When the battery
capacity is nearly exhausted, the battery symbol (
and you will hear the battery warning sound (if the option is switched on) /
menu item "HS SETTINGS/TONE SETUP/BATTERY TONE"). You still have
up to ten minutes of talk time.
Setting the time and date on the handset
At initial operation the handset does not have the correct time (e.g. for entries
in the call list/answering machine). Date and time are set through the menu
item "HS SETTINGS/ DATE & TIME".
Setting the display language
The display language is available 3 languages. The default setting is "German
(Deutsch)". Set the language using the menu item "MT-EINSTEL. /
SPRACHE".

Auto Answer

If this function is activated, an incoming call is taken when the handset is
removed from the base station. The automatic answering function is activated
and deactivated using the menu item "HS SETTINGS/ AUTO ANSWER".
6
) will flash in the display