Memory Function; Storing Data; Recalling Data - Topcom BD-4600 Bedienungsanleitung

BD-4600
"kPa" display "mmHg" display
12

Memory function

12.1

Storing data

The BPM Arm BD-4600 can store up to 60 measurements including the date and time
The result will be stored automatically after the measurement.
12.2

Recalling data

12
This monitor will re-inflate automatically to more pressure
if the system detects that your body needs more pressure
to measure your blood pressure.
• When the measurement is finished, the systolic pressure,
diastolic pressure and WHO indicator will be displayed
alternating with puls rate.
• When an irregular heartbeat is detected, '
displayed.
• When a mistake was detected during measurement the
Error icon 'Err' appears on the display (See chapter 13)
To interrupt the measurement, you may press the START/
STOP button. The cuff will deflate immediately after a
button is pressed.
The monitor will automatically shut off after 2 minutes if no
button is pressed.
To recall measurement results:
When the clock is displayed.
•
•
•
•
•
Press the MEMORY button to enter
memory mode.
The LCD will display the average of
the last 3 measurement results.
Press the MEMORY button
repeatedly for prior values stored
the average of the last 3
measurement results.
Forward
Backward
After the oldest record is displayed,
the unit will display again the switch
back to normal time.
' is
IHB