8
Installing batteries
CAUTION
Failure to use batteries according to instructions can be hazardous.
•
Always use Alkaline batteries of the same type.
•
Ensure that batteries are installed with correct polarity. Damage to the batteries and
the equipment can result from installation with incorrect polarity.
•
Never toss batteries into a fire, due to the risk of explosion.
•
Never allow battery terminals to come into contact with each other or with metal
objects, either intentionally or accidentally. This can cause overheating, fire or
explosion.
•
Keep batteries out of the reach of children. Consult a doctor immediately in case of
swallowing.
•
Fluid from leaking batteries can cause permanent damage to the equipment. Take
particular care when handling damaged or leaking batteries, due to the risk of
corrosion. Wear safety gloves.
•
Remove the batteries if the equipment will not be used for an extended period.
•
Open the battery compartment by pulling the cover away on the bottom of the unit.
•
Insert 4 AA Alkaline batteries. Follow the polarity as indicated in the battery compartment.
When the batteries are low,
batteries must be replaced.
is displayed. Low
BD-4600
9