Topcom BD-4600 Bedienungsanleitung Seite 13

To erase all data from one memory zone:
• Press the MEMORY button for 4 ~ 6 seconds.
• Press the START/STOP button to confirm
13 Symbol indication / Troubleshooting
Display symbol Condition/Cause
The flashing heart will appear when the
pulse is detected during a measurement.
Appears when the battery voltage is
excessively low or the position of batteries
is incorrect.
Appears for 1 minute when the user was
talking, moving or shaking or an irregular
heart beat was detected during
IHB
measurement.
Pressure system is unstable before
measurement
Fail to detect systolic pressure
Fail to detect diastolic pressure
When measurement fails.
Corrective action
Measurements in process.
Do not talk or move.
Replace all batteries with new ones.
Make sure the +/- polarity is correct.
Repeat the measurement.
Note that you be relaxed for at least 5
minutes and sit comfortably and
quietly before you restart a
measurement.
Wrap the cuff correctly and tightly.
Ensure the connection is close
between the air plug and the unit.
Inflate over again after ensuring.
Do not move your arm and body,
and keep quiet.
Measure over again according to
correct way.
BD-4600
13