Product Description And Specifications; Technical Data; Noise/Vibration Information - Bosch GSR 10,8-2-LI Professional Originalbetriebsanleitung

OBJ_BUCH-970-003.book Page 13 Wednesday, July 27, 2011 3:35 PM
Use only original Bosch batteries with the voltage list-
ed on the nameplate of your power tool. When using oth-
er batteries, e. g. imitations, reconditioned batteries or
other brands, there is danger of injury as well as property
damage through exploding batteries.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramic and plastic.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Keyless chuck
2 Torque presetting ring
3 Gear selector
4 Battery unlocking button*
5 Battery*
6 Rotational direction switch
7 On/Off switch
8 Battery charge-control indicator
9 "PowerLight"
10 Handle (insulated gripping surface)
11 Universal bit holder*
12 Screwdriver bit*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Technical Data

Cordless Drill/Driver
Article number
Rated voltage
No-load speed
– 1st gear
– 2nd gear
Max. torque for hard/soft screw-
driving application according to
ISO 5393
Technical data determined with battery from delivery scope.
Please observe the article number on the type plate of your machine.
The trade names of the individual machines may vary.
Bosch Power Tools
Cordless Drill/Driver
Max. drilling dia.
– Steel
– Wood
Max. screw dia.
Chuck clamping range
Weight according to
EPTA-Procedure 01/2003
Technical data determined with battery from delivery scope.
Please observe the article number on the type plate of your machine.
The trade names of the individual machines may vary.

Noise/Vibration Information

Measured sound values determined according to EN 60745.
Typically the A-weighted sound pressure level of the product
is 71 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a
determined according to EN 60745:
Drilling into metal: a
Screwdriving: a
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
GSR 10,8-2-LI
Declaration of Conformity
Professional
We declare under our sole responsibility that the product de-
3 601 H68 1..
scribed under "Technical Data" is in conformity with the fol-
V= 10.8
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2004/108/EC,
-1
min 0 – 350
2006/42/EC.
-1
min 0 – 1300
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Nm 30/13
English | 13
GSR 10,8-2-LI
Professional
mm
mm
mm
mm
kg
(triax vector sum) and uncertainty K
h
2 2
<2.5 m/s , K =1.5 m/s ,
h
2 2
<2.5 m/s , K =1.5 m/s .
h
2 609 140 658 | (27.7.11)
10
19
7
1.0 – 10
0.95