Starting The Programme - Beko WTC 8733 XB0B Bedienungsanleitung

4.3.9 Starting the programme

1. Press Start / Pause button to start the programme.
2. Programme follow-up light showing the startup of the programme will turn on.
C
If no programme is started or no key is pressed within 1-10 minute during programme selection process, the machine will
switch to OFF mode. Display and all indicators are turned off.
Selected programme data will be displayed if you press On / Off button.
4.3.10 Loading door lock
There is a locking system on the loading door of the machine that prevents opening of the door in cases when
the water level is unsuitable.
"Door Locked" LED in the panel turns on when the loading door is locked.
4.3.11 Changing the selections after the programme has started
After the programme has started you can make the following changes.
4.3.11.1 Switching the machine to pause mode:
Press the Start/Pause button to switch the machine to pause mode while a programme is running. The light
indicating the Start/Pause status and programme step starts flashing on the Programme Follow-up indicator
to show that the machine has been switched to the pause mode. Also, Loading Door light will also flash until
the door is ready to be opened. When the loading door is ready to be opened loading door light will will turn off
and programme step indicator and Start / Stop LED continue to flash.
Also, when the loading door is ready to be opened, Loading Door light will also turn off in addition to the
programme step light.
4.3.11.2 Changing the auxiliary function, speed and temperature
Depending on the step the programme has reached, you can cancel or select the auxiliary functions. See,
"Auxiliary function selection".
You can also change the speed and temperature settings. See, "Spin speed selection" and "Temperature
selection".
C
If no change is allowed, the relevant light will flash for 3 times.
4.3.11.3 Adding or taking out laundry
1. Press the Start / Pause button to switch the machine to pause mode. The programme follow-up light of the
relevant step during which the machine was switched into the pause mode will flash.
2. Wait until the Loading Door can be opened.
3. Open the Loading Door and add or take out the laundry.
5. Close the Loading Door.
6. Make changes in auxiliary functions, temperature and speed settings if necessary.
7. Press Start/Pause button to start the machine.
4.3.12 Child Lock
Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid any changes
in a running programme.
C
You can switch on and off the machine with
machine again, programme will resume from where it has stopped.
4.3.12.1 To activate the child lock:
Press and hold Auxiliary Function button 2 for 3 seconds. In the programme selection display on the
panel, "Child lock enabled" light will turn on. You can release Auxiliary Function button 2 when this
warning is displayed.
4.3.12.2 To deactivate the child lock:
Press and hold Auxiliary Function button 2 for 3 seconds. In the programme selection display on the
panel, "Child lock enabled" light will turn off.
46 / EN
On / Off
button when the Child Lock is active. When you switch on the
Washing Machine / User's Manual