Avdel 71204 Originalbetriebsanleitung Seite 44

N o s e A s s e m b l i e s
N o s e T i p s
Jaw Spreader Housing
To fit Nose Tip Type 2 or Nose Extension, the Male 'T' Adaptor 40 must be replaced with Jaw Spreader Housing 9*.
•
Loosen Locknut 39 using 16mm AF Spanner.
•
Unscrew and remove Male 'T' Adaptor 40 together with 'O' Ring 11.
•
Fit Jaw Spreader Housing 9* (71210-02101) together with 'O' Ring 10* or 11* (Jaw Spreader Housing 9* and 'O' Ring 10* or
11* are supplied with Type 2 Nose Assembly)
•
The Jaw Spreader Housing 9* must be tightened onto Head Piston 35 trapping Vacuum Sleeve 41 finally tighten
Locknut 39 against Jaw Spreader Housing 9*.
Items 9* and 10* or 11* refer to illustrations on pages 11 and 12.
For other items refer to the general assembly drawing and parts list on pages 24 and 25.
12
11
40 39
41
35
9*
10* or 11*
41
35