Set control button of hand transmitter
NOTE
The actuation of the door is preset by the supplier to
correspond to the second button of the hand transmitter.
1. Press „+" (if necessary
press several times) until
„5" is displayed.
4. Press button „P" in
order to store the
setting.
56
2. Press „P",
„2" flashes.
(2 = factory setting)
5. Conclude programming
(refer to page 59, method 2)
or
proceed to next setting.
3. Press „+" or „-" to select
the required channel.
1 = button 1
2 = button 2
EN