Setting limits / setting the upper limit
Carrying out the instructions in the wrong
order when setting the limits will result in
malfunctions. Be sure to keep to the setting
order specified.
1. Press „P" for
approx. 5 seconds.
4. Press „+" or press „-".
Setting the lower limit
1. Press „+", the
display shows „2".
4. The door opens
or closes.
2. The door operator
beeps and shows „1".
5. The door opens
or closes.
2. Press „P",
„2" flashes.
5. If the door has moved downwards
to the required position, press „P"
to store the lower limit.
Correct setting order:
1. S et upper limit
2. S et lower limit
3. Press „P",
„1" flashes.
6. If the door has moved up-
wards to the required po-
sition, press „P" to store
the upper limit.
3. Press „+" or press „-".
EN
53