Warming Buns; Care And Cleaning - Gastroback DESIGN TOASTER PRO 2S Bedienungsanleitung

TIP: For your convenience you may lift up the toasting lever somewhat above the
idle position to take out your bread slices.

WARMING BUNS

Never put the food to be heated up directly on top of the bread slots
IMPORTANT:
of the toaster. Do not put any runny or dripping food on or in the toaster to avoid
damage due to overheating, electric shock and fire. Do not heat up 2 items at a
time.
1. Pull the crumb tray out of the appliance and empty the crumb tray. Thereafter
replace the crumb tray.
4. Switch on the appliance by pressing down the toasting lever and,
The toasting process is complete as soon as all LEDs of the LED dis-
play have gone out and the toasting lever jumps back to the upper idle position. If
you do not wish to use the bun warmer again, fold the bun warmer back into the
housing by pulling the bun warmer lever upwards.

CARE AND CLEANING

Always switch OFF the appliance (press the CANCEL button), then
WARNING:
unplug the appliance, and wait until the appliance cooled down (at least 30
minutes), before moving or cleaning the appliance. Ensure not to drip any liquids
into the appliance during cleaning.
Do not turn the appliance upside down. Do not shake the appliance.
not poke in the bread slots to avoid damage to the heating elements and mecha-
nism.
Do not use any abrasive cleaners or corrosive chemicals (e.g. bleach) for cleaning
the appliance or any parts of it, to avoid damage to the surfaces. Do not use any
hard or sharp-edged objects for cleaning any surface of the appliance. Do not
immerse the housing or the power cord in water or any other liquid. Do not spill or
32
2. If you wish to heat up food that is too big for being heated in
the bread slots (e.g. buns, croissants, small cakes), first push
down the bun warmer lever to the stop to fold out the bun
warmer.
3. For each toasting process, place only one piece of food onto
the bun warmer. Ensure that your food will not fall down or
fall into the toaster.
within 10 seconds, select the desired browning level by turning
the browning dial until the appropriate number of LEDs is illumina-
ted.
Do