Operation - Gastroback DESIGN TOASTER PRO 2S Bedienungsanleitung

OPERATION

WARNING: Always ensure that the appliance and all its parts and accessories
are out of reach of young children . The appliance is intended for heating bread
slices, thus the inner heating elements and even the outer surfaces will become very
hot. During operation, only touch the appliance at the operating elements to avoid
scalds.
Only place the appliance on a stable, dry, heat-resistant, and level surface (see:
'General Safety Instructions'). Do not place any clothes or tissue or other foreign
objects on or under the appliance during operation, to avoid risk of fire, overhea-
ting, and electric shock. Do not block the ventilation slots at the bottom of the hou-
sing. During operation, the operating elements (see: 'Knowing Your Design Toaster
Pro 2S') must be accessible all the time.
Bread slices may distort while toasted and therefore touch the heating elements of
the toaster and catch fire. Do not leave the appliance unattended during operation.
Thus, it is crucial to keep the appliance in appropriate distance of at least 50 cm on
each side to any other objects during operation. Ensure to keep the appliance in an
appropriate distance to inflammable objects (e.g. curtains, table art). Do not operate
the appliance under over-hanging boards or drop lights.
Before operating the appliance, always ensure that all parts are in proper working
order and completely dry (see: 'General Safety Instructions'). Do not use any dama-
ged or unsuitable parts to avoid risk of injuries and damage.
To avoid risk of fire, overheating and electric shock: Do not toast any food that is
packed in any type of foil. Do not insert bread slices that are too thin, too big or
broken, or will drip. Before operation always ensure that the crump tray is empty
and inserted correctly.
Before removing bread slices sticking within the bread slots, always unplug the
appliance from the power supply and leave the appliance cool down. Do not insert
any hard or sharp objects into the bread slots, to avoid damage to the heating ele-
ments.
1. Prepare your food. Using a sharp knife with non-serrated blade, cut the bread
into slices of appropriate size (up to 11 x 11 cm, 0.5-2.5 cm thick). Remove any
crumbs before toasting.
There is no need to thaw frozen bread slices before toasting. Instead, you may
TIP:
use the DEFROST function.
2. Pull the crumb tray out of the appliance and empty the crumb tray. Thereafter
replace the crumb tray.
30