Herunterladen Inhalt Inhalt Diese Seite drucken

Gastroback DESIGN TOASTER PRO 2S Bedienungsanleitung Seite 31

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

3. Place the appliance on a suitable working space (see: 'General Safety Instruc-
tions') and connect the appliance to the power supply.
Note:
The toasting lever will not engage in the lower operating position with the appli-
ance not live.
4. Insert the prepared bread slices into the bread slots. Then push the toasting lever
down until it engages in the lower operating position. The CANCEL button illu-
minates. Additionally, some LEDs of the LED display illuminate, indicating the
browning level.
IMPORTANT:
As a default, the toaster starts with browning level 5 (5 LEDs illumina-
ted). You may change this setting or select the defrost or reheat function within 10
seconds after starting the toasting process. However, you can cancel the toasting
process any time you like by pressing the CANCEL button. Thereafter, any recent
setting of the browning level will be deleted from memory. When starting the next
toasting process the appliance will start with the default browning level 5 (see: 'Pro-
perties of Your New Design Toaster Pro 2S').
5. If you wish to change the browning level, turn the browning dial within 10
seconds after starting the toasting process, until the desired number of LEDs is
illuminated.
6. If you wish to reheat bread slices that already cooled down, press the REHEAT
button within 10 seconds after starting the toasting process. The REHEAT button
illuminates and, repeatedly, all 9 LEDs are illuminated one after the other in a
subsequent sequence and go out. With the REHEAT function selected, you cannot
change the browning level.
7. If you wish to toast frozen bread slices, press the DEFROST button within 10
seconds after starting the toasting process. The DEFROST button will illuminate
and the LEDs indicating the browning level will flash. With this function, you may
additionally select the desired browning level via the browning dial.
During the toasting process, the LEDs will go out from the left to the right one after
the other. On completion of the toasting process, even the last LED will have gone
out and the toasting lever will jump back to the upper idle position, automatically
ejecting the bread slices.
-
+
-
+
-
+
31

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis