Case 2 : Connecting To An Audio System (7.1 Channel Amplifier) - Better Quality; Channel Amplifier - Samsung BD-C6600 Bedienungsanleitung

Case 2 : Connecting to an Audio System (7.1 Channel Amplifier)
- Better Quality
1. Using the 7.1CH audio cables, connect the 7.1CH ANALOG AUDIO OUT terminals on the rear of
the product to the 7.1CH ANALOG AUDIO IN terminals of your Amplifier.
2. Using the video signal cable(s), connect the HDMI, COMPONENT or VIDEO OUT terminals on the
rear of the product to the HDMI, COMPONENT or VIDEO IN terminal of your TV. (See pages 20~23)
3.
Turn on the product, TV and Amplifier.
4.
Press the input select button of the Amplifier to select the external input in order to hear sound from
the product. Refer to your Amplifier's user manual to set the Amplifier's audio input.
NOTE
▪
The front left and right outputs on your product and 7.1 channel amplifier must be connected to hear disc menu audio
from certain Blu-ray discs.
When you connecting the 7.1CH ANALOG AUDIO OUT terminals using 7.1CH audio cables, it is recommended to set
▪
the Digital Output to PCM. (See page 33)
▪
When connecting to a 5.1 channel home theatre or receiver, connect all the Analogue Audio output jacks from the
product except for the Surround Back Left/Surround Back Right outputs.
7.1CH audio cables
(not included)

7.1 Channel Amplifier


English