Method 3 Connecting To An Audio System (7.1 Channel Amplifier); Method 4 Connecting To An Av Receiver With Dolby Digital Or Dts Decoder - Samsung BD-F7500 Bedienungsanleitung

Method 3 Connecting to an Audio System (7.1 Channel Amplifier)

• Using 7.1CH audio cables (not supplied), connect the 7.1CH ANALOGUE AUDIO OUT terminals on the
rear of the Player to the 7.1CH ANALOGUE AUDIO IN terminals of your Amplifier.
• Better Quality

Method 4 Connecting to an AV receiver with Dolby Digital or DTS decoder

• Using a digital Optical cable (not supplied), connect the Optical Digital Audio Out jack on the product to
the Digital Optical In jack of the receiver.
• Good quality
• You will hear sound only through the front two speakers with Digital Output set to PCM.
| NOTES |
\ The front left and right outputs on your player and 7.1 channel amplifier must be connected to hear disc menu audio from
certain Blu-ray discs.
\ When connecting to a 5.1 channel home theatre or receiver, connect all the Analogue Audio output jacks from the player
except for the Surround Back Left/Surround Back Right outputs.
Audio
7.1 Channel
Amplifier
SURR. : SURROUND
SURROUND BACK
19
|
English