Pioneer SGY-PM900H79 Benutzerhandbuch Seite 15

■ Zero point calibration fails.
Cause
The crank is subjected to external
force or moving.
■ The Cyclocomputer display is a strange, while I am riding.
Cause
Zero point calibration fails.
■ There is a rattling noise when I am riding.
Cause
Cable ties that install the sensor or
screws are loose.
■ The magnet ring is rubbing while I am riding.
Cause
Foreign objects are attached to the
magnet ring and rub the transmitter
or the junction box.
Solution
Remove the pedal from the crank and calibrate the sensor
in still condition (see page 12).
Solution
Calibrate the zero point (see page 12).
Solution
Retighten the cable ties and screws.
Solution
Clean the transmitter, junction box, and magnet ring.
EN
Troubleshooting
15