Answering Machine; Remote Access - Peaq PDP 270 Bedienungsanleitung

ENGLISH
3. If the other handset answers choose
"CONF".
4. You are now connected with the second
handset and the external caller.
Hands-free
This function allows you to make a call without
having to hold the handset in your hand.
1. Press
hands-free function.
2. Press again to deactivate.
Mute
Press during a call to mute the microphone.
You can talk without the caller hearing you.
Press again

Answering machine

When putting the base station into initial
operation, the answering machine is preset
with a standardized welcome message. The
activated display at the base station shows
that the answering machine is activated.
RETRIEVE VOICE MESSAGES VIA
HANDSET
• New messages on the answering
machine are shown by text message
"New message: x" (x=number of new
messages) blinking below handset name.
• For playing new voice messages push
the left display button.
38
IM_PDP270_150518_V03_HR.indb 38
during a call to activate the
to switch on the microphone.
RETRIEVE VOICE MESSAGES VIA BASE
STATION
• The blinking display of base station shows
the number of new messages.
• For playing new messages directly push
button Play voice messages/Pause
• For deleting the message push button
Delete Voice message
Note:
The number of played messages which were
not deleted are permanently shown in display.

REMOTE ACCESS

You can operate your answering machine when
you are away from home. Simply make a call
to your phone with a phone using tone dialing
and enter your 4-digit PIN code.
1. Make a call to your home number with a
phone using tone dialing.
2. Push * twice after you heard the
announcement.
3. Enter your PIN code (factory setting: 000).
• You now have access to your
answering machine, and you can
now listen to the new messages.
4. Press a key to choose a function. See the
Remote access commands table below
for a list of available functions.
Key Function
1 Previous message
2 Play messages
3 Skip to next message
6 Stop playing
7 Delete current message
.
.
18/5/15 11:36 AM