Peaq PDP 270 Bedienungsanleitung Seite 41

RESET HANDSET
Reset handset will only erase your custom
settings. Phonebook, Caller log and SMS will
not be reset.
• Press the right display button to reset.
Reset handset to default
Please note that all previous settings will be
deleted.
1. Press Flash button (
seconds.
2. Confirm with the right display button.
RESET BASE
Reset base will only erase your custom settings.
Phonebook, Caller log and SMS will not be
reset.
1. Confirm with the right display button.
2. Enter PIN.
RESET BASE TO DEFAULT
Please note that all settings will be erased
3. Press INT button for at least 10 seconds.
4. Confirm with the right display button.
Phonebook
NEW ENTRY
Phonebook
New Entry
Edit Entry
Show Details
Delete Entry
Delete All
Copy Entry
Name, phone number, ringtone and group will
be set in sequence.
IM_PDP270_150518_V03_HR.indb 41
• Name: Enter a name with the numeric
buttons. Toggle between upper and lower
case with the star button. Press right
display button to save.
• Phone number: Enter the phone number
with the numeric buttons. Press right
display button to save.
• Ringtone: Assign a ringtone to a new
entry. Press right display button to save.
• Group: Assign the new entry to a group.
Press right display button to save.
) for least 10
EDIT ENTRY
Edit name, phone number, ringtone and group
in sequence. Save one by one after entering
by pressing the right button.
SHOW DETAILS
Display the group, the name, the phone number
and the assigned ringtone for a selected
phonebook entry.
• Dial phone number by pressing the right
display button.
• Press left display button to return to
phonebook.
DELETE ENTRY
Press the right display button to confirm to
delete the selected entry. To cancel press left
display button.
DELETE ALL
Press right display button to confirm to delete
all phonebook entries. To cancel press left
display button.
COPY ENTRY
If more than one handset is registered with
the base, you can copy selected phonebook
entry to another handset.
1. Select the handset to copy the entry.
2. Confirm with the right display button. The
display will show "Copying from Handset
x" (x=number of handset).
ENGLISH
41
18/5/15 11:36 AM