Cleaning And Care - Peaq PDP 270 Bedienungsanleitung

ENGLISH
Telephony
Telephony
Dial Mode
Auto Talk
Recall
Prefix
DIAL MODE
There are two options available:
• Tone: Tone dialing or multi-frequency
signaling, standard dialing method
nowadays
• Pulse: Pulse dialing for older appliances
AUTO TALK
You can select automatically taking calls if the
handset is taken from the base station or not.
RECALL
The Flash button is used to forward calls if the
telephone is used in a telephone system. The
Flash button will cause a short interruption.
• Short: interruption cycle 100 ms
• Long: interruption cycle 300 ms
Choose the preferred setting with navigation
buttons and confirm with right display
button.
Note: If your telephone provider supports
special services the flash button can be used
e.g. for "Call waiting".
PREFIx
This function allows to automatically dial a
prefix number before any external call.
Note: If no prefix number is saved the option
"New" is shown. If prefix number is saved the
options "On/Off", "Show/Hide" and "Edit" are
available.
48
IM_PDP270_150518_V03_HR.indb 48
• New: Enter the prefix which shall be used
for each external call.
• On/Off: Turn on or off automatic prefix.
• Show/Hide:
- Show prefix
- Hide prefix
• Edit: Edit the prefix

Cleaning and care

• Unplug the adaptor from the socket before
cleaning the unit.
• Attention! Do not let water penetrate
into the unit.
• Clean the housing with a lightly dampened
cloth.
• Do not use sharp, scouring or aggressive
cleaners.
• Do not use chemicals (such as gasoline
or alcohol) to clean the housing.
18/5/15 11:36 AM