Peaq PDP 270 Bedienungsanleitung Seite 46

ENGLISH
Note:
• You can switch on and off the answering
machine directly at the base station. For
switching on/off push button Answering
machine On/Off.
• You can toggle between "Only answer
call" (--> display oo) and "Answer call
and record message" (--> display 00)
by pushing button "Answering machine
On/Off" for long time.
RECORD MEMO
Choose this option to leave a message. Wait
for the welcome message and confirmation
tone, leave your message and push right display
button to save the message.
Note: Voice memos can also be recorded
directly at the base station. Press the Forward
button for 2 seconds. Wait for the welcome
message and confirmation tone, leave your
message and stop recording with Stop button.
WELCOME MESSAGE
The answering machine is prepared with
preinstalled welcome messages. Following
options are available:
• Record message: Record an individual
welcome message
• Play Message: Play recorded message
Note: After recording a message it will be
played once directly after recording.
ANSWERING MACHINE SETTINGS
With this option you can configure your
answering machine.
Answer Mode
Following options are available
• Answer & Record: After welcome
message the caller can leave a message.
• Answer only: The welcome message
is played but the caller cannot leave a
message.
46
IM_PDP270_150518_V03_HR.indb 46
ANSWER DELAY
• Set the number of rings after which the
answer machine will answer incoming
calls. Set a number between 2 and 9 rings
or choose setting "Toll Saver".
• Toll Saver mode: If there are no new
messages the answering machine will
answer calls after ringing 5 times. If new
messages are available incoming calls
will be answered after 2 times.
SECURITY CODE
Follow below instructions to change security
code of base station:
1. Enter the old 3-digit security code (factory
setting 000).
2. Confirm entry with right display button.
3. Enter a new 3-digit security code.
4. Confirm entry with right display button and
reenter code and confirm entry again. A
confirmation tone confirms the change.
Note: You will need this code for remotely
playing voice messages.
LANGUAGE
This option is for selecting the language of the
answering machine. Choose the language with
the navigation buttons
setting with right display button.
Organizer
Organizer
Calendar
Appointment
Stop Watch
Alarm
and confirm the
18/5/15 11:36 AM